Constructed Wetlands are one method of controling adverse BOD or COD levels. Constructed Wetlands also assist reducing Nitrification, removes total suspended solids as mentioned previously, control Total Coliform Units (adverse microbial life) and also importantly can sequester heavy metals with plant or micobes. The importance of using certain species of plant life cannot be taken for granted as certain types can remove higher than normal levels of phosphorus, nitrogen and heavy metals. Such effective plant systems include cattails, water hyancith and peat moss. The The Rehabilitation of Abandoned Coal Mines was an area of high emphasis a decade ago and is still of concern. Land that was eroded from coal mining activity must first be remediated. The EPA also encourages that abandoned coal mines be reopened and re-mined due to the amount of coal still contained in the mines. The implementation of Constructed Wetlands can assist and help prevent erosion by controling acid mine drainage. Settling ponds that contain plant life like peat moss and cattails as well as the introduction of iron oxidizing bacteria such as Thiobacillus Ferrodoxins can control sulfates and other minerals such as iron, copper and zinc [ 2. Silva ]. The bacteria especially assist in controling sulfate levels from the use of sulfuric acid. Akin to coal mining is also the wastewater emissions from Coal based Electrical Power Plants. The EPA wants to have guidelines on wastewater discharge from the coal power plants since they contain high levels of toxic metals. Coal plants use a large amount of water and are usually located near lakes or other large fresh water bodies. Scrubbers at the smokestacks of power plants also contribute mightily to the amount of pollutants that get discharged. Constructed Wetlands are one of several methods that can
be used to reduce contaminants and pollutants that are emitted from industry, storm water, mining and power plants. The use of plant or microbial life added to constructed wetlands has the advantage of sequestering metals, minerals, suspended solids and even organics. Even water purification equipment may not be able to eliminate or even reduce much of these pollutants. This does not mean that there are not other effective water treatment systems on the market, in fact there are several other wastewater treatment systems invented by various companies that can reduce or eliminate these types of pollutants from industry wastewater. One industry of comparison is Oil Refineries, they have found it necessary in the past to use holding ponds that biochemically treat the wastewater, such as ponds are called biooxidation ponds. This is similar to constructed wetland setups.
Monday, April 18, 2011
Constructed Wetlands aide in Industrial & Urban Wastewater Remediation
Constructed Wetlands implement the use of plants and/or microbial life to reduce pollutants contained in wastewater effluent from industry. They are useful in situations where industry wastewater may eventually leach into fresh water bodies, eventually contaminating the fresh water supply. Constructed wetlands require adequate space or holding areas that are able to control drainage as well as amount of time wastewater is stored in order to sequester the pollutants from plant or microbial resources. Industry wastewater effluent is becoming much of a concern, especially in states where there is a lot of industry together with agriculture such as California, or states where there is much mining. In states such as California also, non-point source pollution from storm runoff water causes pollutants such as grease, oil and fertilizers to get into sewar systems. It is said that non-point source pollution is the leading cause of fresh water pollution. Marsh type structures have been built to control, contain and even help reduce the pollutants contained in storm runoff water. Marsh structures can contain ponds with underwater sills or braided channel structures that have cattails [ 1. Meiorin ]. These storm water treatment systems help to contain Suspended Solids, which may contribute to much of the pollution. Industry type wastewater can also come from various different processing plants that are in rural areas. Much of industry wastewater that has need for treatment is from the food processing industry. Other examples include the Chlor-Alkali Industry as well as Tanneries. Tanneries are of special concern because the wastewater with pollutants is accumulated from several processes such as soaking hides, unhairing hides and other manufacturing processes. This type of wastewater is known to have chemicals plus organics while containing a high alkaline content. The Chlor-Alakli industry produces chlorine and caustic soda but produces wastewater that is both caustic and acidic. Chemical and organics plus other pollutants that change the pH of water can affect oxygen levels in fresh water bodies. Adverse Biological or Chemical Oxygen Demand (COD or BOD) levels can affect the aquatic life in fresh water bodies.
REFERENCES
1. "Urban Runoff Treatment in a Fresh/Brackish Water Marsh in Fremont, CA" by E. Meiorin in Constructed Wetlands for Wastewater Treatment - Municipal, Industrial & Agricultural [1989] by D. Hammer
2. "Biology & Chemistry of Generation, Prevention and Abatement of Acid Mine Drainage" by M. Silva in Constructed Wetlands for Wastewater Treatment - Municipal, Industrial & Agricultural [1989] by D. Hammer
KEYWORDS: Constructed Wetlands, Acid Mine Drainage Abatement, Rehabilitation of Abandoned Coal Mines, Sequestration of Heavy Metals from Wastewater, Non-Point Source Pollution, Total Suspended Solids, Biological or Chemical Oxygen Demand, Thiobacillus Ferrodoxins, Denitrification, Chlor-Alkali Industry, Storm Water Runoff, Holding Ponds, Alkaline and Acidic Wastewater
Subscribe to:
Post Comments (Atom)


No comments:
Post a Comment